October 6, 2020

Industrial Lighting 101: Impact of dust and dirt on thermal management

Heat is the killer of all things electronic. LED fixtures are no different. Fixtures need to be designed with superior thermal management in mind. This includes preventing dust and dirt from building up and trapping the heat inside the fixture. A dusty, dirty layer of insulation will lead to overheating and early failure.
August 19, 2020
best thermal design title

Industrial Lighting 101: Best thermal design for dirty industrial facilities

Upgrading the LED lighting in your industrial facility? Make sure to consider the ambient temperature – many times you’ll see temperatures exceeding 140°F. Plus, the fixtures are likely to be exposed to dust, gases and manufacturing debris. Poorly designed LED fixtures often have limited-ability heat sinks to begin with. Many others have fins that will collect dust and other debris, creating an insulating layer that severely diminishes its capacity to dissipate heat, reducing its life and performance. In this article, we’ll explore how to find LED fixtures with the best thermal design to perform well under these harsh environments.
August 19, 2020
Make sure it is a true 65C fixture

Industrial Lighting 101: Make sure it is a true 65°C fixture

Are you upgrading the LED lighting in your unconditioned facility? Don’t be fooled by the “advertised” ambient temperature rating claiming it is a 65°C fixture. Many manufacturers use potentially deceitful spec sheets to make you think their fixture will withstand those high ambient temperatures. The marketing claims and the fine print in the spec sheets are contradictory. Make sure it is a true 65°C fixture. 
April 3, 2020
Gold Fish Wearing a Shark Mask

Overstating Performance – Look Out for the Spec Sheet Star!

As you know from the previous three parts of this blog, when a light fixture’s output equals 70% of its initial output, it is deemed unacceptable.  This will require the owner to replace the light in order to provide a safe workplace.
February 11, 2020
Can you trust all lighting spec sheets?

Can you trust all lighting spec sheets?

As you know from the previous three parts of this blog, when a light fixture’s output equals 70% of its initial output, it is deemed unacceptable.  This will require the owner to replace the light in order to provide a safe workplace.
October 8, 2019
Quote about the consequences of avoiding reality

When LED lights reach L70, what do we do with them?

As you know from the previous three parts of this blog, when a light fixture’s output equals 70% of its initial output, it is deemed unacceptable.  This will require the owner to replace the light in order to provide a safe workplace.
July 24, 2019

L70: What causes some LED lights to reach L70 faster than others?

The major cause of LED fixtures losing light output faster than others is low-quality components. As with any engineered product, the manufacturer must make choices - and compromises - on the level of quality of materials and components to be used for the finished product in order hit the cost targets. This is no different when manufacturing LED fixtures.
June 4, 2019
Lumen Maintenance Warranty

L70: What is it and why do we need it?

When purchasing LED lighting, read the warranties carefully. Most warranties do not cover when an LED fixture does not meet its advertised performance, leaving you in the dark, light-wise and warranty-wise. Unlike most, Flex Lighting Solutions provides a true and transparent 5-year lumen maintenance warranty.
April 17, 2019
LED Lighting at Rexnord Manufacturing Plant with LED High Bays from Flex Lighting Solutions

Do you know what foot-candles are? Know the basics of lighting before you buy

Are you looking to purchase or upgrade your lighting? Before you do, make sure you are familiar with the basic parameters so you don’t become confused and end up with the wrong lighting solution. These basic parameters apply to both traditional and modern LED lighting solutions.